TFTP Server not working
Running Version 8.5.4 (x64 build 1942) - Official Release - 30 May 2019
TFTP seem to be not working for me.
Start TFTP Server when Any session connects
Local directories up and download set to the same folder
When I do a TFTP copy from a Cisco IOS box specifying my laptop IP address the TFTP copy attempt times out as if there is not reply.
Note1 TFTP Log:
Here is what appears in the TFTP log file when I run SecureCRT and connect to a host:
Thu Jun 3 07:12:28 2021,18700,,Starting server on [::]:69 Thu Jun 3 07:12:28 2021,18700,,Starting server on 0.0.0.0:69
Does that signal an issue?
Note2 Wireshark on my laptop:
I run wireshark on my laptop them execute the TFTP copy on my IOS box.
I can see 6 TFTP Read request packets arrive from my IOS box.
No replies going out.
Note3 Laptop firewall:
In my expereicne the fact that wiresahrk is showing the TFTP packets arrive suggests there is no laptop firewall issue.
Note4 Laptop IP address:
I have only one NIC currently with an IP address
From an old post I type in
type netstat -an | find "69"
But this give an error.
I canot work out the correct syntax.
Might you know what is correct?
Anyway netstat output shows the same as the TFTP log
Any suggestions how to proceed?
Much appreciate any help
"0.0.0.0" is the standard way of networking applications saying, "All available IPv4 network interfaces". In other words, SecureCRT is reporting that when it requested the OS open up a UDP port, it asked the OS to listen on all available IPv4 network interfaces (AKA "0.0.0.0") pertaining to the entire machine, rather than specifying a specific NIC IP. For the sake of convenience and simplicity, this is usually what you want since it prevents you from having to reconfigure SecureCRT's TFTP server to listen on a different IP address every time you change networks or your DHCP-assigned address changes, etc.
Which specific connection protocol are you using in SecureCRT to get connected to your "IOS box"? (Serial, SSH1, SSH2, Telnet, etc.)
In fact, with a situation as involved as this one, would you please send your reply to us at email@example.com and include Attn Cameron: Forum Thread #14553 in the subject line?