Welcome to the VanDyke Software Forums

Join the discussion today!


Go Back   VanDyke Software Forums > Secure Shell

Closed Thread
 
Thread Tools Display Modes
  #1  
Old 04-28-2010, 04:44 PM
zeromiler zeromiler is offline
Registered User
 
Join Date: Apr 2010
Posts: 4
Can't Connect to Cisco Device using SSH

Here's my trace output.

SecureCRT - Version 4.1.11 (build 297)
[LOCAL] : RECV : Remote Identifier = "SSH-1.99-Cisco-1.25"
[LOCAL] : CAP : Remote can re-key
[LOCAL] : CAP : Remote sends language in password change requests
[LOCAL] : CAP : Remote sends algorithm name in PK_OK packets
[LOCAL] : CAP : Remote sends algorithm name in public key packets
[LOCAL] : CAP : Remote sends algorithm name in signatures
[LOCAL] : CAP : Remote sends error text in open failure packets
[LOCAL] : CAP : Remote sends name in service accept packets
[LOCAL] : CAP : Remote includes port number in x11 open packets
[LOCAL] : CAP : Remote uses 160 bit keys for SHA1 MAC
[LOCAL] : CAP : Remote supports new diffie-hellman group exchange messages
[LOCAL] : CAP : Remote correctly handles unknown SFTP extensions
[LOCAL] : CAP : Remote correctly encodes OID for gssapi
[LOCAL] : CAP : Remote correctly uses connected addresses in forwarded-tcpip requests
[LOCAL] : SEND : KEXINIT
[LOCAL] : RECV : Read kexinit
[LOCAL] : Available Remote Kex Methods = diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
[LOCAL] : Selected Kex Method = diffie-hellman-group-exchange-sha1
[LOCAL] : Available Remote Host Key Algos = ssh-rsa
[LOCAL] : Selected Host Key Algo = ssh-rsa
[LOCAL] : Available Remote Send Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
[LOCAL] : Selected Send Cipher = aes128-cbc
[LOCAL] : Available Remote Recv Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
[LOCAL] : Selected Recv Cipher = aes128-cbc
[LOCAL] : Available Remote Send Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
[LOCAL] : Selected Send Mac = hmac-md5
[LOCAL] : Available Remote Recv Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
[LOCAL] : Selected Recv Mac = hmac-md5
[LOCAL] : Available Remote Compressors = none
[LOCAL] : Selected Compressor = none
[LOCAL] : Available Remote Decompressors = none
[LOCAL] : Selected Decompressor = none
[LOCAL] : SEND : KEXDH_GEX_REQUEST
[LOCAL] : RECV: TCP/IP close
[LOCAL] : Connected for 0 seconds, 464 bytes sent, 728 bytes received

SecureCRT - Version 4.1.11 (build 297)
[LOCAL] : RECV : Remote Identifier = "SSH-1.99-Cisco-1.25"
[LOCAL] : CAP : Remote can re-key
[LOCAL] : CAP : Remote sends language in password change requests
[LOCAL] : CAP : Remote sends algorithm name in PK_OK packets
[LOCAL] : CAP : Remote sends algorithm name in public key packets
[LOCAL] : CAP : Remote sends algorithm name in signatures
[LOCAL] : CAP : Remote sends error text in open failure packets
[LOCAL] : CAP : Remote sends name in service accept packets
[LOCAL] : CAP : Remote includes port number in x11 open packets
[LOCAL] : CAP : Remote uses 160 bit keys for SHA1 MAC
[LOCAL] : CAP : Remote supports new diffie-hellman group exchange messages
[LOCAL] : CAP : Remote correctly handles unknown SFTP extensions
[LOCAL] : CAP : Remote correctly encodes OID for gssapi
[LOCAL] : CAP : Remote correctly uses connected addresses in forwarded-tcpip requests
[LOCAL] : SEND : KEXINIT
[LOCAL] : RECV : Read kexinit
[LOCAL] : Available Remote Kex Methods = diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
[LOCAL] : Selected Kex Method = diffie-hellman-group-exchange-sha1
[LOCAL] : Available Remote Host Key Algos = ssh-rsa
[LOCAL] : Selected Host Key Algo = ssh-rsa
[LOCAL] : Available Remote Send Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
[LOCAL] : Selected Send Cipher = aes128-cbc
[LOCAL] : Available Remote Recv Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
[LOCAL] : Selected Recv Cipher = aes128-cbc
[LOCAL] : Available Remote Send Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
[LOCAL] : Selected Send Mac = hmac-md5
[LOCAL] : Available Remote Recv Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
[LOCAL] : Selected Recv Mac = hmac-md5
[LOCAL] : Available Remote Compressors = none
[LOCAL] : Selected Compressor = none
[LOCAL] : Available Remote Decompressors = none
[LOCAL] : Selected Decompressor = none
[LOCAL] : SEND : KEXDH_GEX_REQUEST
[LOCAL] : RECV: TCP/IP close
[LOCAL] : Connected for 0 seconds, 464 bytes sent, 728 bytes received
  #2  
Old 04-28-2010, 06:13 PM
jdev's Avatar
jdev jdev is offline
VanDyke Technical Support
 
Join Date: Nov 2003
Location: Albuquerque, NM
Posts: 936
This is a duplicate post of one you made earlier. We'll post a response there.

--Jake
__________________
Jake Devenport
VanDyke Software
Technical Support
YouTube Channel: https://www.youtube.com/vandykesoftware
Email: support@vandyke.com
Web: https://www.vandyke.com/support
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:21 PM.