ctrl+c does not stop tail -f

[romber]

i'm using securecrt for mac 8.3.1,
when i connect to a linux server and run tail -f command,
ctrl+c does not stop it, instead, it prints ^C,
but other commands, like ping, ctrl+c works fine,
does anyone have any idea about this?
thanks in advance.

[bgagnon]

Hi romber,

What is the emulation you have configured in the session to the Linux server? (Terminal / Emulation category of Session Options)

If anything other than Xterm, if you switch to Xterm and disconnect/reconnect, what are the results?

[romber]

hi, i tried both xterm and linux, and both does not work fine...

[bgagnon]

Hi romber,

When connected to the remote server, please run the command "stty -a". Please post the resulting output.

[romber]

speed 38400 baud; rows 43; columns 223; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread -clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke

[bgagnon]

Hi romber,

I cannot replicate your results.

I will need some files from you that can contain sensitive data and are not appropriate for posting in the public forum, so please send an email to support@vandyke.com and reference "Attn Brenda - Forum Thread #13177" in the subject line.