Welcome to the VanDyke Software Forums

Join the discussion today!


Go Back   VanDyke Software Forums > File Transfer

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 05-20-2021, 09:58 AM
MARCUSR MARCUSR is offline
Registered User
 
Join Date: May 2021
Posts: 1
Cisco ASA Profile not working on SecureFX

Code:
i SecureFX version 9.0.2.2496 (Official Release - May 20, 2021)
i Attempting to connect to 10.225.225.99
i Session window 00002 established for session AACFW01-102302-Y39 - 10.225.225.99
i SSH2Core version 9.0.2.2496
i Connecting to 10.225.225.99:22 ...
i Changing state from STATE_NOT_CONNECTED to STATE_EXPECT_KEX_INIT
i Using protocol SSH2
i RECV : Remote Identifier = 'SSH-2.0-Cisco-1.25'
i CAP  : Remote can re-key
i CAP  : Remote sends language in password change requests
i CAP  : Remote sends algorithm name in PK_OK packets
i CAP  : Remote sends algorithm name in public key packets
i CAP  : Remote sends algorithm name in signatures
i CAP  : Remote sends error text in open failure packets
i CAP  : Remote sends name in service accept packets
i CAP  : Remote includes port number in x11 open packets
i CAP  : Remote uses 160 bit keys for SHA1 MAC
i CAP  : Remote supports new diffie-hellman group exchange messages
i CAP  : Remote correctly handles unknown SFTP extensions
i CAP  : Remote correctly encodes OID for gssapi
i CAP  : Remote correctly uses connected addresses in forwarded-tcpip requests
i CAP  : Remote can do SFTP version 4
i CAP  : Remote uses SHA1 hash in RSA signatures for x.509v3
i CAP  : Remote x.509v3 uses ASN.1 encoding for DSA signatures
i CAP  : Remote correctly handles zlib@openssh.com
i SSPI : Requesting full delegation
i SSPI : [Kerberos] SPN : host@10.225.225.99
i SSPI : [Kerberos] InitializeSecurityContext() failed.
i SSPI : [Kerberos] The specified target is unknown or unreachable
i SSPI : [Kerberos] Disabling gss mechanism
i GSS  : Requesting full delegation
i GSS  : [Kerberos] SPN : host@10.225.225.99
i GSS  : [Kerberos] InitializeSecurityContext() failed.
i GSS  : [Kerberos] Could not load library 'gssapi64.dll': The specified module could not be found.
i GSS  : [Kerberos] Disabling gss mechanism
i GSS  : [Kerberos] Disabling gss mechanism
i The following key exchange method has been filtered from the key exchange method list because it is not supported: gss-group1-sha1-toWM5Slw5Ew8Mqkay+al2g==
i SSPI : Requesting full delegation
i SSPI : [Kerberos (Group Exchange)] SPN : host@10.225.225.99
i SSPI : [Kerberos (Group Exchange)] InitializeSecurityContext() failed.
i SSPI : [Kerberos (Group Exchange)] The specified target is unknown or unreachable
i SSPI : [Kerberos (Group Exchange)] Disabling gss mechanism
i GSS  : Requesting full delegation
i GSS  : [Kerberos (Group Exchange)] SPN : host@10.225.225.99
i GSS  : [Kerberos (Group Exchange)] InitializeSecurityContext() failed.
i GSS  : [Kerberos (Group Exchange)] Could not load library 'gssapi64.dll': The specified module could not be found.
i GSS  : [Kerberos (Group Exchange)] Disabling gss mechanism
i GSS  : [Kerberos (Group Exchange)] Disabling gss mechanism
i The following key exchange method has been filtered from the key exchange method list because it is not supported: gss-gex-sha1-toWM5Slw5Ew8Mqkay+al2g==
i SEND : KEXINIT
i SEARCH: C:\ProgramData\VanDyke\Known Hosts\
i SEARCH: C:\Users\__REDACTED__\AppData\Roaming\VanDyke\Config\KnownHosts\
i RECV : Read kexinit
i Available Remote Kex Methods = diffie-hellman-group1-sha1
i Selected Kex Method = diffie-hellman-group1-sha1
i Available Remote Host Key Algos = ssh-rsa
i Selected Host Key Algo = ssh-rsa
i Available Remote Send Ciphers = aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr
i Selected Send Cipher = aes256-ctr
i Available Remote Recv Ciphers = aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr
i Selected Recv Cipher = aes256-ctr
i Available Remote Send Macs = hmac-sha1,hmac-sha1-96
i Selected Send Mac = hmac-sha1-96
i Available Remote Recv Macs = hmac-sha1,hmac-sha1-96
i Selected Recv Mac = hmac-sha1-96
i Available Remote Compressors = none
i Selected Compressor = none
i Available Remote Decompressors = none
i Selected Decompressor = none
i Changing state from STATE_EXPECT_KEX_INIT to STATE_KEY_EXCHANGE
i SEND : KEXDH_INIT
i RECV : KEXDH_REPLY
i Changing state from STATE_KEY_EXCHANGE to STATE_READY_FOR_NEW_KEYS
i RECV: Remote Hostkey (SHA-2 hash hex): 00:db:0c:e1:71:c2:45:ee:14:8a:de:e9:7a:73:12:d4:66:a4:ca:44:3c:8d:b7:43:71:51:53:93:7e:6e:bd:0c
i RECV: Remote Hostkey (SHA-2 hash base64): ANsM4XHCRe4Uit7penMS1GakykQ8jbdDcVFTk35uvQw
i RECV: Remote Hostkey (SHA-1 hash): de:f9:95:61:77:c9:3a:2f:3b:d9:40:0e:94:f5:e9:1f:d0:2b:e7:84
i RECV: Remote Hostkey (MD5 hash): c8:01:83:84:3e:aa:a7:c2:bd:ab:e3:45:e1:64:0c:83
i SEARCH: 0 entries found for host
i SEARCH: 1 entries found for host
i SEARCH: hostkey was matched in database.
i SEND : NEWKEYS
i Changing state from STATE_READY_FOR_NEW_KEYS to STATE_EXPECT_NEWKEYS
i RECV : NEWKEYS
i Changing state from STATE_EXPECT_NEWKEYS to STATE_CONNECTION
i SEND: SERVICE_REQUEST[ssh-userauth]
i RECV: SERVICE_ACCEPT[ssh-userauth] -- OK
i SENT : USERAUTH_REQUEST [none]
i Authenticating as user __REDACTED___
i RECV : SSH_MSG_USERAUTH_BANNER
i This U.S government system is intended to be used by
i [authorized __REDACTED__ network users] for viewing and retrieving information only,
i except as otherwise explicitly authorized. __REDACTED__ information resides on and
i transmits through computer systems and networks funded by __REDACTED__. All use
i is considered to be with an understanding and acceptance that there is no
i reasonable expectation of privacy for any data or transmissions on
i Government Intranet or Extranet (non-public) networks or systems. All
i transactions that occur on this system and all data transmitted through
i this system are subject to review and action including (but not limited to)
i monitoring, recording, retrieving, copying, auditing, inspecting,
i investigating, restricting access, blocking, tracking, disclosing to
i authorized personnel, or any other authorized actions by all authorized __REDACTED__
i and law enforcement personnel. All use of this system constitutes
i understanding and unconditional acceptance of these terms. Unauthorized
i attempts or acts to either (1) access, upload, change, or delete
i information on this system, (2) modify this system, (3) deny access to this
i system, or (4) accrue resources for unauthorized use on this system are
i strictly prohibited. Such attempts or acts are subject to action that may
i result in criminal, civil, or administrative penalties.
i 
i RECV : USERAUTH_FAILURE, continuations [publickey,password]
i SENT : USERAUTH_REQUEST [password]
i RECV : AUTH_SUCCESS
i SEND[0]: SSH_MSG_CHANNEL_OPEN('session')
i SEND[0]: Pty Request (term: vt100, rows: 1024, cols: 256)
i RECV[0]: pty request succeeded
i SEND[0]: shell request
i RECV[0]: shell request succeeded
i RECV[0]: This U.S government system is intended to be used by
i RECV[0]: [authorized __REDACTED__ network users] for viewing and retrieving information only,
i RECV[0]: except as otherwise explicitly authorized. __REDACTED__ information resides on and
i RECV[0]: transmits through computer systems and networks funded by __REDACTED__. All use
i RECV[0]: is considered to be with an understanding and acceptance that there is no
i RECV[0]: reasonable expectation of privacy for any data or transmissions on
i RECV[0]: Government Intranet or Extranet (non-public) networks or systems. All
i RECV[0]: transactions that occur on this system and all data transmitted through
i RECV[0]: this system are subject to review and action including (but not limited to)
i RECV[0]: monitoring, recording, retrieving, copying, auditing, inspecting,
i RECV[0]: investigating, restricting access, blocking, tracking, disclosing to
i RECV[0]: authorized personnel, or any other authorized actions by all authorized __REDACTED__
i RECV[0]: and law enforcement personnel. All use of this system constitutes
i RECV[0]: understanding and unconditional acceptance of these terms. Unauthorized
i RECV[0]: attempts or acts to either (1) access, upload, change, or delete
i RECV[0]: information on this system, (2) modify this system, (3) deny access to this
i RECV[0]: system, or (4) accrue resources for unauthorized use on this system are
i RECV[0]: strictly prohibited. Such attempts or acts are subject to action that may
i RECV[0]: result in criminal, civil, or administrative penalties.
i RECV[0]: This U.S government system is intended to be used by
i RECV[0]: [authorized __REDACTED__ network users] for viewing and retrieving information only,
i RECV[0]: except as otherwise explicitly authorized. __REDACTED__ information resides on and
i RECV[0]: transmits through computer systems and networks funded by __REDACTED__. All use
i RECV[0]: is considered to be with an understanding and acceptance that there is no
i RECV[0]: reasonable expectation of privacy for any data or transmissions on
i RECV[0]: Government Intranet or Extranet (non-public) networks or systems. All
i RECV[0]: transactions that occur on this system and all data transmitted through
i RECV[0]: this system are subject to review and action including (but not limited to)
i RECV[0]: monitoring, recording, retrieving, copying, auditing, inspecting,
i RECV[0]: investigating, restricting access, blocking, tracking, disclosing to
i RECV[0]: authorized personnel, or any other authorized actions by all authorized __REDACTED__
i RECV[0]: and law enforcement personnel. All use of this system constitutes
i RECV[0]: understanding and unconditional acceptance of these terms. Unauthorized
i RECV[0]: attempts or acts to either (1) access, upload, change, or delete
i RECV[0]: information on this system, (2) modify this system, (3) deny access to this
i RECV[0]: system, or (4) accrue resources for unauthorized use on this system are
i RECV[0]: strictly prohibited. Such attempts or acts are subject to action that may
i RECV[0]: result in criminal, civil, or administrative penalties.
i RECV[0]: User __REDACTED___ logged in to AACFW01-52283-Y40
i RECV[0]: Logins over the last 43 days: 2.  Last login: 15:46:56 GMT Apr 30 2021 from 10.224.189.18
i RECV[0]: Failed logins since the last login: 0.
i RECV[0]: Type help or '?' for a list of available commands.
i SEND[0]: terminal length 0
i RECV[0]: AACFW01-52282-Y40/admin/act/pri# terminal length 0
i RECV[0]:                                           ^
i RECV[0]: ERROR: % Invalid input detected at '^' marker.
i SEND[0]: enable
i RECV[0]: AACFW01-52282-Y40/admin/act/pri# enable
i RECV[0]:                                   ^
i RECV[0]: ERROR: % Invalid input detected at '^' marker.
i SEND[0]: pwd
i RECV[0]: AACFW01-52282-Y40/admin/act/pri# pwd
i RECV[0]:                                   ^
i RECV[0]: ERROR: % Invalid input detected at '^' marker.
i SCP command failed.
i Remote operating system type is Cisco ASA.
i SEND[0]: cd
i RECV[0]: AACFW01-52282-Y40/admin/act/pri# cd
i RECV[0]:                                   ^
i RECV[0]: ERROR: % Invalid input detected at '^' marker.
i SEND[0]: dir
i RECV[0]: AACFW01-52282-Y40/admin/act/pri# dir
i RECV[0]:                                    ^
i RECV[0]: ERROR: % Invalid input detected at '^' marker.

Last edited by jdev; 05-20-2021 at 10:23 AM. Reason: Remove sensitive information that should have been redacted by OP
Reply With Quote
  #2  
Old 05-20-2021, 11:00 AM
berdmann berdmann is offline
VanDyke Technical Support
 
Join Date: Aug 2017
Posts: 441
Hi MARCUSR,

I just replied to your email regarding this issue.

Please refer to my response to your message.
__________________
Thanks,
--Brittney

VanDyke Software
Technical Support
support@vandyke.com
(505) 332-5730
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:28 AM.