View Single Post
  #1  
Old 02-13-2019, 04:48 PM
jdev's Avatar
jdev jdev is offline
VanDyke Technical Support
 
Join Date: Nov 2003
Location: Albuquerque, NM
Posts: 879
Post Example: TAPI Replacement Dialer - Use Serial

If you experience trouble with SecureCRT trying to get TAPI to successfully dial for you on Windows, here's an example script that you can use to work around TAPI.

The script uses the Serial protocol to talk to the COM port of your modem, asking the modem to do the dialing directly instead of farming it out to the Windows system's TAPI dialer.

To configure a session to work with this script, download the script file and then follow these steps:
  1. Open Windows' "Device Manager" and locate your modem within the "Modems" area.
  2. Right-click your modem and choose Properties
  3. Select the Modem tab and note the Port: setting. In this example the port is COM3. Your modem may very well be on a different port.
  4. Create a new session in SecureCRT.
    • Set the Protocol to Serial.
    • In the Logon Actions category, enable the Logon script option and browse to the location of the script file that you downloaded.
    • In the Arguments field under the Logon script, enter the phone number sequence you wish to dial. For example: 9,1-555-555-1212
  5. Save your session, and use it each time you want to dial that number.

--Jake
Attached Images
File Type: png DeviceManager_Modems.png (42.0 KB, 201 views)
File Type: png MyModem_Properties.png (23.4 KB, 71 views)
File Type: png SerialDialerSessionProperties_LogonActions.png (25.5 KB, 71 views)
Attached Files
File Type: txt TAPIReplacementDialer-UseSerial.vbs.txt (4.1 KB, 34 views)
__________________
Jake Devenport
VanDyke Software
Technical Support
YouTube Channel: http://www.youtube.com/vandykesoftware
Email: support@vandyke.com
Web: http://www.vandyke.com/support