View Single Post
  #7  
Old 03-27-2020, 03:59 AM
jumpinjack jumpinjack is offline
Registered User
 
Join Date: Mar 2020
Posts: 4
I am still not seeing a 169 address

netsh>interface ipv4 show addresses

Configuration for interface "ibaFOB-D Network"
DHCP enabled: No
InterfaceMetric: 25

Configuration for interface "Bluetooth Network Connection"
DHCP enabled: Yes
InterfaceMetric: 50

Configuration for interface "Wireless Network Connection"
DHCP enabled: Yes
IP Address: 192.168.1.104
Subnet Prefix: 192.168.1.0/24 (mask 255.255.255.0)
Default Gateway: 192.168.1.254
Gateway Metric: 0
InterfaceMetric: 40

Configuration for interface "Local Area Connection"
DHCP enabled: No
IP Address: 10.94.185.2
Subnet Prefix: 10.94.185.0/24 (mask 255.255.255.0)
Default Gateway: 10.94.185.254
Gateway Metric: 256
InterfaceMetric: 10

Configuration for interface "Loopback Pseudo-Interface 1"
DHCP enabled: No
IP Address: 127.0.0.1
Subnet Prefix: 127.0.0.0/8 (mask 255.0.0.0)
InterfaceMetric: 50


I did do more messing about yesterday. I turned off all interface but the one I want and was able to connect to it...The problem was when I turned another interface back on the address changed in the status bar of SecureCRT. It seems the software does not lock the interface in.

Thanks for the assistance on this.
Jack
Reply With Quote