View Single Post
  #3  
Old 04-28-2010, 04:36 PM
zeromiler zeromiler is offline
Registered User
 
Join Date: Apr 2010
Posts: 4
Secure CRT fails to connect to cisco router when using SSH

I'm having the same problem when I try to connect to a Cisco Router using SSH. Below is the trace output.

SecureCRT - Version 4.1.11 (build 297)
[LOCAL] : RECV : Remote Identifier = "SSH-1.99-Cisco-1.25"
[LOCAL] : CAP : Remote can re-key
[LOCAL] : CAP : Remote sends language in password change requests
[LOCAL] : CAP : Remote sends algorithm name in PK_OK packets
[LOCAL] : CAP : Remote sends algorithm name in public key packets
[LOCAL] : CAP : Remote sends algorithm name in signatures
[LOCAL] : CAP : Remote sends error text in open failure packets
[LOCAL] : CAP : Remote sends name in service accept packets
[LOCAL] : CAP : Remote includes port number in x11 open packets
[LOCAL] : CAP : Remote uses 160 bit keys for SHA1 MAC
[LOCAL] : CAP : Remote supports new diffie-hellman group exchange messages
[LOCAL] : CAP : Remote correctly handles unknown SFTP extensions
[LOCAL] : CAP : Remote correctly encodes OID for gssapi
[LOCAL] : CAP : Remote correctly uses connected addresses in forwarded-tcpip requests
[LOCAL] : SEND : KEXINIT
[LOCAL] : RECV : Read kexinit
[LOCAL] : Available Remote Kex Methods = diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
[LOCAL] : Selected Kex Method = diffie-hellman-group-exchange-sha1
[LOCAL] : Available Remote Host Key Algos = ssh-rsa
[LOCAL] : Selected Host Key Algo = ssh-rsa
[LOCAL] : Available Remote Send Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
[LOCAL] : Selected Send Cipher = aes128-cbc
[LOCAL] : Available Remote Recv Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
[LOCAL] : Selected Recv Cipher = aes128-cbc
[LOCAL] : Available Remote Send Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
[LOCAL] : Selected Send Mac = hmac-md5
[LOCAL] : Available Remote Recv Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
[LOCAL] : Selected Recv Mac = hmac-md5
[LOCAL] : Available Remote Compressors = none
[LOCAL] : Selected Compressor = none
[LOCAL] : Available Remote Decompressors = none
[LOCAL] : Selected Decompressor = none
[LOCAL] : SEND : KEXDH_GEX_REQUEST
[LOCAL] : RECV: TCP/IP close
[LOCAL] : Connected for 0 seconds, 464 bytes sent, 728 bytes received

SecureCRT - Version 4.1.11 (build 297)
[LOCAL] : RECV : Remote Identifier = "SSH-1.99-Cisco-1.25"
[LOCAL] : CAP : Remote can re-key
[LOCAL] : CAP : Remote sends language in password change requests
[LOCAL] : CAP : Remote sends algorithm name in PK_OK packets
[LOCAL] : CAP : Remote sends algorithm name in public key packets
[LOCAL] : CAP : Remote sends algorithm name in signatures
[LOCAL] : CAP : Remote sends error text in open failure packets
[LOCAL] : CAP : Remote sends name in service accept packets
[LOCAL] : CAP : Remote includes port number in x11 open packets
[LOCAL] : CAP : Remote uses 160 bit keys for SHA1 MAC
[LOCAL] : CAP : Remote supports new diffie-hellman group exchange messages
[LOCAL] : CAP : Remote correctly handles unknown SFTP extensions
[LOCAL] : CAP : Remote correctly encodes OID for gssapi
[LOCAL] : CAP : Remote correctly uses connected addresses in forwarded-tcpip requests
[LOCAL] : SEND : KEXINIT
[LOCAL] : RECV : Read kexinit
[LOCAL] : Available Remote Kex Methods = diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
[LOCAL] : Selected Kex Method = diffie-hellman-group-exchange-sha1
[LOCAL] : Available Remote Host Key Algos = ssh-rsa
[LOCAL] : Selected Host Key Algo = ssh-rsa
[LOCAL] : Available Remote Send Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
[LOCAL] : Selected Send Cipher = aes128-cbc
[LOCAL] : Available Remote Recv Ciphers = aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
[LOCAL] : Selected Recv Cipher = aes128-cbc
[LOCAL] : Available Remote Send Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
[LOCAL] : Selected Send Mac = hmac-md5
[LOCAL] : Available Remote Recv Macs = hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96
[LOCAL] : Selected Recv Mac = hmac-md5
[LOCAL] : Available Remote Compressors = none
[LOCAL] : Selected Compressor = none
[LOCAL] : Available Remote Decompressors = none
[LOCAL] : Selected Decompressor = none
[LOCAL] : SEND : KEXDH_GEX_REQUEST
[LOCAL] : RECV: TCP/IP close
[LOCAL] : Connected for 0 seconds, 464 bytes sent, 728 bytes received
Reply With Quote